VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual page 5

M S
OUNTING UPPORT
The single board computer must be supported at all eight mounting points to prevent excessive
flexing when expansion modules are attached and removed. Flex damage caused by excessive
force on an improperly mounted circuit board is not covered under the product warranty. See
page 5 for more details.
E G R
ARTH ROUND EQUIREMENT
All mounting standoffs should be connected to earth ground (chassis ground). This provides
proper grounding for EMI purposes. The figure below shows the locations of the board's
mounting holes. All mounting holes identified in below must be connected to earth ground.
Figure 1. Attaching the EBX-38 to Earth Ground
v
EBX-38 Hardware Reference Manual