Furuno FAR-2807 Operator's Manual page 109

Message
CABLE ATT ADJ Adjustment (at installation) according to
length of antenna cable.
DELETE CARD Deleting data from memory card.
DATA
FORMAT CARD Formatting memory card.
DATA
MEMORY CARD Memory card is full
FULL
PM Performance monitor active
RD CARD DATA Reading from memory card.
SART Radar set up to receive SART.
TUNE INITIALIZE Initializing tuning.
USER DEFAULT Restoring user defaults.
VIRTUAL AIS ATON: TT•AIS SYMBOL is turned OFF in the
OFF AIS VIRTUAL ATON menu.
WR CARD DATA Writing to memory card.
Note 1: It is not possible to acknowledge the radar critical alarms from external equipment
without displaying the reason/cause for the alarm. Radar critical alarms are TT COLLISION
and AIS COLLISION.
Note 2: This radar does not receive alert information from external bridge alert management
systems.
Note 3: All warnings are changed to alarms after 60 sec (manufacturer fixed time period).
Indication description
Visual indication, reason
1. RADAR OPERATION
To clear message
Indication disappears when procedure is
completed.
Delete MARK, OWN TRACK or TGT TRACK
to free some space in the memory.
Indication disappears when procedure is
completed.
Change the menu setting to ON.
Indication disappears when procedure is
completed.
1-87