Table of Contents
Advertisement
button to select Auto Test or Manual Test
Auto Test
Select Auto Test, press the ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, shutter, color, CMY, gobo, gobo rotation, prism, prism rotation, iris,
frost, zoom, focus, dimmer and lamp on/off. Press the MENU button back to the last menu or exit
menu mode after auto test.
Manual Test
Select Manual Test, press the ENTER button to confirm, the present channel will show on the
display, use the UP/DOWN button to select channel, press the ENTER button to confirm, then use
the UP and DOWN button to adjust the value, press the ENTER button to store, the fixture will run
as the channel value indicates. Press the MENU button back to the last menu or exit menu mode
idling one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select Fixture use hour, Light use hour,Temperature,Lamp State,Fan State
or Firmware Version.
Fixture use hour
Select Fixture use hour, press the ENTER button to confirm, fixture use time will show on the
display, press the MENU button to exit.
Light use hour
Select Light use hour, press the ENTER button to confirm, light use time will show on the display,
press the ENTER button to confirm, use the UP/DOWN button to select Exit or Reset Time, press
the ENTER button to confirm. Press the MENU button back to the last menu or exit menu mode
idling one minute.
15F
Advertisement
Table of Contents
