Figure 4-12: Connect Power Cable to Power Supply
4.7.3 Keyboard/Mouse Connector
The WAFER-PV-D5252/D4252/N4552 is shipped with a keyboard/mouse Y-cable
connector. The keyboard/mouse Y-cable connector connects to a keyboard/mouse
connector on the WAFER-PV-D5252/D4252/N4552 and branches into two cables that are
each connected to a PS/2 connector, one for a mouse and one for a keyboard. To connect
the keyboard/mouse Y-cable connector please follow the steps below.
Step 1:
Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.
Step 2:
Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the WAFER-PV-D5252/D4252/N4552 keyboard/mouse connector. See
Figure 4-13.
Page 54
WAFER-PV-D5252/D4252/N4552 SBC