SiME341909EA
5.2
BRC1H81 Series
Group address
To control the system with central control equipment, you need to set addresses for:
Groups (Group) and/or
Units (Group (Unit)).
The Group address menu has two levels. You define groups and/or units in the first level, and
set or release addresses for those groups and/or units in the second.
First level
Second level
Part 3 Remote Controller
Centralized Control Group No. Setting
Group (Group): A group is a group of indoor units.
Unit (Group (Unit)): A unit is an individual indoor
unit.
Define the indoor unit for which you want to set an
address.
Define an address for the indoor unit.
To SET an address, make sure
Apply settings.
To RELEASE an address that was previously set,
change
to
and then apply settings.
is selected
49