Installing Ipssend And Ipsmon For Windows Nt, Netware, Or Os/2 - IBM Netfinity ServeRAID-3H Installation And User Manual

Hide thumbs Also See for Netfinity ServeRAID-3H:
Table of Contents

Advertisement

Installing IPSSEND and IPSMON for Windows NT, NetWare, or OS/2

To install these programs for Windows NT, NetWare, or OS/2:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the CD-ROM drive.
3. If you are using NetWare, go to step 5 on page 68. If you are using Windows NT or OS/2, create an
IPSADM directory on your hard disk. To do this, go to the operating system command prompt and
type:
md c:\ipsadm
where c is the drive letter of the drive where OS/2 or Windows NT is installed.
4. Press Enter.
5. Copy the IPSSEND.EXE file to your hard disk drive by typing one of the following at the command
prompt:
For Windows NT, type:
copy z:\programs\winnt\cmdline\ipssend.exe c:\ipsadm
For NetWare, from a DOS prompt type:
copy z:\programs\netware\cmdline\ipssend.nlm c:\nwserver
For OS/2, type:
copy z:\programs\os2\cmdline\ipssend.exe c:\ipsadm
Notes:
a. Where z is the drive letter for the CD-ROM drive that contains the IBM ServeRAID Support CD
and c is the drive letter where Windows NT, NetWare, or OS/2 is installed.
b. These instructions assume that you installed NetWare in the NWSERVER directory.
6. Press Enter; then, copy the IPSMON.EXE file to your hard disk drive by typing one of the following at
the command prompt:
For Windows NT, type:
copy z:\programs\winnt\cmdline\ipsmon.exe c:\ipsadm
For NetWare, from a DOS prompt type:
copy z:\programs\netware\cmdline\ipsmon.nlm c:\nwserver
For OS/2, type:
copy z:\programs\os2\cmdline\ipsmon.exe c:\ipsadm
Notes:
a. Where z is the drive letter for the CD-ROM drive that contains the IBM ServeRAID Support
CD and c is the drive letter of the drive where Windows NT, NetWare, or OS/2 is installed.
b. These instructions assume that you installed NetWare in the NWSERVER directory.
7. Press Enter; then, refer to Chapter 5, "Using utility programs" on page 73 for information to start and
use the IPSSEND and IPSMON programs.
68
IBM ServeRAID-3H, ServeRAID-3HB, and ServeRAID-3L, Controllers

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netfinity serveraid-3hbNetfinity serveraid-3l

Table of Contents