Elation VOLT Q5E SIX PACK User Manual page 18

S YS T E M M E N U
EDIT PROGRAM – Record Controller – Working with Built-In Program [continued]
4. Program Selection for Edit Program
Select "EditProg".
Press ENTER to confirm.
Select the desired program. With this function you can edit specific scenes into a specific
program.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
Select "EditProg".
Press ENTER to confirm.
Select "EditScen".
Select desired scene numbers. A maximum of 250 scenes can be programmed.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, & 13
Program 4 includes scenes: 8, 9, & 10
Program 6 includes scenes: 12, 13, 14, & 15
Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
The 3 Secondary groups run the Auto Program in certain time segments. (See chart below)
PART 1
SCENE 10
SCENE 11
SCENE 12
SCENE 13
PART 2
SCENE 8
SCENE 9
SCENE 10
SCENE 8
18
PART 3
SCENE 12
SCENE 13
SCENE 14
SCENE 15