Canopy Assembly; Blades Assembly - Create WINDLIGHT CURVE DC User Manual

CANO PY AS SE M B LY
• Raise the canopy to hanging bracket, aligning loosened screws in hanging bracket with
slotted holes in the canopy.
• Twist the canopy to lock. Re-insert the screws and secure all the screws with a screw-
driver.
• With hanging bracket secured to the outlet box and able to support the fan, you are
now ready to hang your fan.
• Grab the fan firmly with two hands. Slide downrod through the opening in the hanging
bracket and let the hanging ball rest on the hanging bracket.
• Turn the hanging ball slot until it lines up with the hanging bracket tab.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up
to you once you are set on the ladder.
B L ADE S AS SE MB LY
Align the holes on the blade holder with the holes on the blades and the motor body and
screw them in place, but don't tighten them until they are all placed and screwed in.
Tip: To save time, you can fit the washers on each screw prior to installing the blades.
1
1 2 3
2
E NG L I SH
11