Table Of Contents; Using The Device For The First Time; Inserting The Batteries; Selecting Standard Or Mam Mode - Microlife BP W70 Manual

Table of Contents

1. Using the Device for the First Time
• Inserting the batteries
• Selecting standard or MAM mode
• Selecting Wrist Position Indicator
• Setting the date and time
• Selecting the user
2. Checklist for Taking a Reliable Measurement
3. Taking a Blood Pressure Measurement
• How not to store a reading
• How do I evaluate my blood pressure?
• Appearance of the Pulse Arrhythmia Indicator (PAD)
4. Data Memory
• Viewing the stored values
• Memory full
• Clearing all values
5. Battery Indicator and Battery change
• Low battery
• Flat battery - replacement
• Which batteries and which procedure?
• Using rechargeable batteries
2
6. Error Messages
7. Safety, Care, Accuracy Test and Disposal
• Safety and protection
• Device care
• Cleaning the cuff
• Accuracy test
• Disposal
8. Guarantee
Technical Specifications
9.

1. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The
battery compartment 5 is on the bottom of the device. Insert the
batteries (2 x 1.5 V, size AAA), thereby observing the indicated polarity.

Selecting standard or MAM mode

Before each measurement, select standard (single measurement) or
MAM mode (automatic double measurement). In MAM mode,
2 measurements are automatically taken in succession and the
result is then automatically analysed and displayed. Because the
blood pressure constantly fluctuates, a result obtained in this way
is more reliable than when a single measuremnt is performed.
• After the new batteries are fitted, Smart MAM mode ON/OFF