Resetting To Factory Defaults - MacDon M1240 Operator's Manual

Resetting to Factory Defaults

1. Press soft key 5 (A), and use the Harvest Performance
Tracker (HPT) scroll knob (B) or the ground speed lever
(GSL) scroll wheel (not shown) to place the red cursor
over the SETTINGS icon (C).
2. Press the HPT scroll knob (B) or the GSL SELECT
button (not shown) to activate the main menu (C)
options.
3. Scroll to the DISPLAY SETTING icon (A) and
press SELECT.
4. Scroll to the RESET TO DEFAULTS icon (B), and press
SELECT to open the adjustment window.
5. Scroll through the available options, and press
SELECT to reset to default. Refer to the following list
for factory default options:
●
SELECT ALL
● DISPLAY BRIGHTNESS
●
KEYPAD BRIGHTNESS BY DAY
●
DISPLAY VOLUME
●
LANGUAGE (English)
●
UNITS (USA)
●
ECO ENGINE CONTROL SPEED (4 and 6 cylinders have different speeds)
●
MAX CAB FORWARD SPEED 14 MPH
●
MAX ENGINE FORWARD SPEED 27 MPH
●
HEADER SPEED SETTINGS
214053
OPERATOR'S STATION
Figure 3.101: Opening the Main Menu
Figure 3.102: Opening the Reset to
Defaults Page
93
Revision A