11/08 Rev. 5.01-01 USER MANUAL LA-BO Safety Instructions General notes ..........1 Validity and binding effect of this manual .. 1 Illustrations and descriptions ..... 2 Safety instructions ......... 3 Information and qualifications ....3 Operational safety of the unit ....4...
Validity and binding effect of this manual Contents The present manual refers exclusively to the LA-BO applicator. It is written for the purpose of ensuring professional usage and calibration of the unit. Prerequisites for the use and adjustment are the professional installation and configuration of the unit.
Always follow the instructions. Figures Texts are accompanied by figures where necessary. Generally, the LA-BO unit shown is a right-handed version. The left-handed version is only shown where it is necessary to differentiate between the two.
Observe the additional safety and warning notes on the LA-BO unit. Only permit competent people to operate and configure this unit. When working with the LA-BO for a longer period, it is advisable to use hea- ring protection. Keep the product...
Repairs to the device may only be performed by authorised specialists who are aware of the risks involved. Protection against Applicators of type LA-BO operate using low voltage 24 V DC supplied by injuries by electri- Avery Dennison print-and-apply or labelling heads.
Page 6
There is a low risk that you may get your hands crushed between the vacuum grid of the LA-BO and the conveyed products! Never reach between the product and the LA-BO edge while the unit is in operation or ready for operation.