Security Bezel Replacement; Remove The Security Bezel - Lenovo ThinkSystem SR150 Maintenance Manual

Figure 70. ID label installation
2. Reinstall the security bezel if it is removed (see
3. Install the server into the rack if necessary.
4. Reconnect power cords and all external cables.

Security bezel replacement

Use this procedure to remove or install the security bezel.

Remove the security bezel

Use this information to remove the security bezel.
Before removing the security bezel:
1. Read "Safety" on page iii
2. If the server is installed in a rack, extend or remove the server from the rack.
To remove the security bezel, complete the following steps:
Step 1. Use the key to unlock the security bezel to the open position.
Figure 71. Unlocking the security bezel
Step 2. Press the release latch and rotate the security bezel outward to remove it from the chassis.
ThinkSystem SR150 Maintenance Manual
74
"Install the security bezel" on page
and "Installation Guidelines" on page 31
75).
to ensure that you work safely.