Install The Processor - Lenovo ThinkSystem SR150 Maintenance Manual

Step 1. Gently pull the handle away from the processor retainer.
Step 2. Lift the handle along with the retainer to the fully open position.
Figure 61. Opening the processor retainer
Step 3. Hold the processor by both sides and gently lift it away from the processor socket.
Notes:
1. Do not touch the gold contacts on the bottom of the processor.
2. Keep the processor socket clean from any object to prevent possible damages.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the processor

Use this information to install the processor. This procedure must be executed by a trained technician.
Before you install the processor, complete the following steps:
1. Read "Safety" on page iii
2. If there is any old thermal grease on the processor, gently clean the top of the processor using an
alcohol cleaning pad. Dispose of the cleaning pad after all of the thermal grease is removed.
Note: If you are applying new thermal grease on the top of the processor, make sure to do it after the
alcohol has fully evaporated.
3. Apply the thermal grease on the top of the processor with syringe by forming four uniformly spaced
dots, while each dot consists of about 0.1 ml of thermal grease.
and "Installation Guidelines" on page 31 to ensure that you work safely.
.
Chapter 3 Hardware replacement procedures
69