Figure 56. PCIe riser assembly installation
Step 2.
Attach the label to the front side of the PCIe riser assembly.
Figure 57. PCIe riser assembly installation
Step 3.
Align the two tabs on PCIe riser assembly with the slots on the rear chassis; then, insert the PCIe
riser assembly into the connector on the system board. Carefully press the riser card straight down
into the slot until it is fully seated.
Figure 58. PCIe riser assembly installation
After you install the PCIe riser assembly, complete the following steps:
1. Install the top cover onto the server (see
ThinkSystem SR150 Maintenance Manual
64
"Install the top cover" on page
87).