Lenovo ThinkSystem SR150 Quick Start

ThinkSystem SR150
Type 7Y54
Quick Start
Your shipping box contains the following items:
SR150

Material box, including printed documentation

If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase and packing material.
They might be required to receive warranty service.
First glance
Server front view:
Server front view
VGA connector
USB 2.0 with Lenovo
XClarity Controller
management
USB 3.1 Gen1 connector
Power button/LED (green)
Drive activity LED (green)
Note 1: Depending on the configuration, the illustrations above might
differ slightly from your server.
Network activity LED
(green)
Identification button/LED
(blue)
System error LED (yellow)
Simple-swap drive bays
Rack release latches
Server rear view:
Server rear view
PCIe slot 1
PCIe slot 2
Server power connector
USB 3.1 Gen1 connectors
Setting up the System
1. Install the required solution components.
2. Install the server into the rack.
See the Rack Installation Guide provided with the rail kit.
3. Connect the cables.
4. Connect the management controller to the network.
5. Power on the server.
6. Configure the system.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/topic/7Y54/introduction.html
PN: SP47A31791
Printed in China
LAN connector 2
LAN connector 1 with
Lenovo XClarity Controller
management
VGA connector
Serial connector