Figure 72. Security bezel removal
Table 20. Security bezel removal
Release latch
1
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the security bezel
Use this information to install the security bezel.
Before you install the security bezel, complete the following steps:
1. Read
"Safety" on page iii
To install the security bezel, complete the following steps:
Step 1.
Carefully insert the tabs on the security bezel into the slots on the right rack handle. Press and hold
the release latch; then, pivot the security bezel inward until it clicks in place.
Figure 73. Security bezel installation
Step 2.
Use the key to lock the security bezel to the closed position.
Figure 74. Locking the security bezel
and
"Installation Guidelines" on page 31
to ensure that you work safely.
.
Chapter 3
Hardware replacement procedures
75