Lauda Proline RP 845 C Operating Instructions Manual page 95

Proline Edition X cooling thermostats
Command
IN_PAR_06
IN_PAR_07
IN_PAR_09
IN_PAR_10
IN_PAR_14
IN_PAR_15
IN_DI_01
IN_DI_02
IN_DI_03
IN_DO_01
IN_DO_02
IN_DO_03
IN_MODE_00
IN_MODE_01
IN_MODE_02
IN_MODE_03
IN_MODE_04
TYPE
VERSION_R
VERSION_S
VERSION_B
VERSION_T
VERSION_A
VERSION_V
VERSION_D
VERSION_M_0
VERSION_M_1
VERSION_M_3
VERSION_M_4
VERSION_M_5
STATUS
STAT
YACE0100 / October 4, 2018
Read current value of TvE (0 = OFF).
Read current value of TdE.
Read current value of correction limitation
Read current value of XpF.
Read setpoint offset.
Read current value of PropE.
State of contact input 1: 0 = open / 1 = closed.
State of contact input 2: 0 = open / 1 = closed.
State of contact input 3: 0 = open / 1 = closed.
State of Contact output 1:
0 = make-contact open / 1 = make-contact closed.
State of Contact output 2:
0 = make-contact open / 1 = make-contact closed.
State of Contact output 3:
0 = make-contact open / 1 = make-contact closed.
Keyboard Master: 0 = free / 1 = inhibited.
Control: 0 = internal / 1 = external Pt100 / 2 = external analogue /
3 = external serial
Standby: 0 = Unit ON / 1 = Unit OFF.
Keyboard Command: 0 = free / 1 = inhibited.
Setpoint offset source: 0 = normal / 1=external Pt / 2 = external analogue /
3 = external serial
Read the device type (for example "RP 845").
Read software version number of control system.
Read software version number of protection system.
Read software version number of Command.
Read software version number of cooling system.
Read software version number of analogue module.
Read software version number of RS-232/485 module.
Read software version number of digital module.
Read software version number of solenoid valve (Cooling water).
Read software version number of solenoid valve (Automatic refill).
Read software version number of solenoid valve (shut-off valve 1).
Read software version number of solenoid valve (shut-off valve 2).
Read software version number of high-temperature cooler.
Read equipment status 0 = OK, -1 = error.
Read error diagnosis
Response: XXXXXXX  X = 0 no error, X = 1 error.
1. char = error
2. char = Alarm
3. char = Warning
4. char = over temperature
5. char = low-level error
6. char = high-level error (at adjustment alarm)
7. char = no external control variable
Interfaces - Modules
Explanation
95