Lauda Proline RP 845 C Operating Instructions Manual page 46

Master
MNEnu
3x to
PArA
to 2x
StArt
or
Wait 4 seconds or

Command
Display
Sounds Master
Sounds Command
Language
Master Mode
Autostart
Current consumpt.
Pump Menu

46
StArt
 Call the start option
 The start mode can be changed here.
°C
 The display
Auto

an interruption.
MNAn

interruption.
 Display flashes 4 s  new value is automatically accepted, or
 Value is immediately accepted with the Enter key.
 When the mains voltage is restored after an interruption, standby is activated in
MNAn
the mode and
with .
Off
On
End T
set
 When the mains voltage has been restored after an interruption, you can quit
the standby mode with
Proline Edition X cooling thermostats
StArt
Auto MNAn
or
, when operation is be restored automatically again after
, when the standby mode is to be activated after a mains
StArt
is displayed. You can quit the standby mode
Auto start
 Open the device parameter menu via the
soft key
 With the cursor keys continue to:

Auto start

On
 If the standby mode is to be activated
after a mains interruption, select "Off"
with
 Accept the change with
T
fix
 or quit the window with
changes.
.
Starting up
.
flashes.
Menu .

Settings Basic settings
.
is currently active.
or .
YACE0100 / October 4, 2018

or End ,
without making