Lauda Proline RP 845 C Operating Instructions Manual page 30

Display
Sounds Master
Sounds Command
Language
Master Mode
Autostart
Current Consumpt.
Pump Menu
T °C
set
25.
Pump Menu
30
Brightness
Contrast
End T
set
Screen
00
T °C
int
Standby
25.
01
Screen T
set
Proline Edition X cooling thermostats
 Soft keys: 5 duo-keys, which each have
Brightness
The brightness and contrast can be set on the
Command Console:
 The works setting can be changed via
 The brightness of the LCD illumination can
 The contrast can be set in eight steps.
T
fix
There are four different screen displays
available.
The screen is switched over with the soft key
Screen :
1. Basic window with the three most
55.3
Y(%)

0.0


Soft keys:


T
fix



Starting up
the function shown in display above them.
Soft-key entries are shown framed in the
operating instructions. Example: You
would like to change the setpoint
temperature then press the duo-key under
T .
set
Contrast
 
Settings Basic settings

Display Brightness
be selected from eight steps or switched
off completely.
important items of information:
T , current bath temperature,
int
T , setpoint of the bath or external
set
temperature,
Information: Heating / cooling. Here,
heating is taking place at 55.3 % and
0.0 % cooling.
Pump: Set pump level
Menu: Set unit parameters.
Screen: Changes between basic, normal,
super and graphics recorder windows.
T : Changes setpoint temperature.
set
T : Calling and setting of saved
fix
setpoints.
YACE0100 / October 4, 2018

or 
Contrast .