Proline Edition X cooling thermostats
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
YACE0100 / October 4, 2018
30,00°C
End
T
T
set
intern
intern + extern
End
T
T
set
Store in Set 9
End
T
T
set
Starting up
With the menu
temperature for the test run can be set.
The bath temperature will oscillate less
than about ±15 Kelvin around the set
temperature.
Change the display in the adjacent
window and accept with
fix
With the menu
control parameters for internal control or
for the internal control and the external
control can be detected automatically.
To detect the control parameters for the
external application, a temperature probe
must be connected to the thermostat.
fix
With the menu
actual set control parameters can be
stored in parameter set 9.
After the test run the detected control
parameters will be taken over as control
parameters automatically. If the para-
meters found do not fulfil your
expectations, the before set parameters
can be restored ( 7.13.3).
fix
Setpoint
the set
.
Identification
the optimal
Actual Parameters
the
79