Table of Contents
Advertisement
4.1 Installation Preparation
You need to prepare following accessories before installation.
No.
Name
1
Lens
2
Lens Cap
3
Light Source
4
Power and I/O Cable
5
Network Cable
DC Switch
6
Supply
4.2 Install Device
Before You Start
● Make sure that the device in the package is in good condition and all assembly parts are included.
● Make sure that all the related devices are powered off during the installation.
Note
Here we take type II device as an example to introduce the installation process.
Steps
1. Use M4 screw to fix the device to fixed bracket.
2. Select one of installation methods, and install the device to the installation position.
SC5000 Series Smart Camera Quick Start Guide
Chapter 4 Installation
Table 4-1 Accessories
Quantity
Some models of the device do not have lens. You need to
1
purchase lens separately.
The device has equipped with transparent lens cap by default.
1
For some models of the device, you can use half or full
polarization lens cap.
Some models of the device have equipped with white LED lamps
1
by default. Red, blue, or NIR light source is optional.
1
It refers to the 12-pin power and I/O cable.
1
It refers to the GigE network cable with an aviation connector.
Power
You need to purchase the DC switch power supply that meets
1
the device's power supply and consumption requirement.
Description
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC5000 Series and is the answer not in the manual?
Questions and answers