Table of Contents
Advertisement
4.3 3G/4G LTE Internet Connection Setup: Fill out all relevant parameters provided by your
ISP.
4.4 Saving Configuration Settings: The Setup Wizard has completed. Click BACK to make
changes or correct mistakes. Click NEXT to save settings. If the Internet connection is not
ready, please double check your 3G/4G LTE settings again.
Troubleshooting
1. None of the LEDs are on when you turn on the Router.
Check the connection between the adapter and the router. If the error persists, you may have
a hardware problem. In this case you should contact technical support.
2. You have forgotten your Router login and/or password.
Try the default login and password, please refer to User Manual or consult with your Internet
Service Provider. If this fails, you can restore your router to its factory settings by holding the
Reset button on the back of your router for 6 seconds or more.
vary by different Internet Service Providers.>
3. Can't ping any PCs on the LAN.
Check the LAN(PoE) LED on the Router. The LED should be on for the port that has a PC
connected. If it is off, check the cables between your Router and the PC. Make sure you have
uninstalled any software firewall for troubleshooting. Verify that the IP address and the subnet
mask are consistent between the router and the workstations.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the user manual. If
you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
Contact Billion
WORLDWIDE
http://www.billion.com
On-line Manual
http://support.billion.com/_Internet/usermanual/BiPAC4700ZU_4700ZUL.pdf
9
BiPAC 4700ZU(L) 4G/LTE Outdoor (VPN) Router
<*This username / password may
BiPAC 4700ZU(L): V3.0EN (AAMPIMBIL4700ZULX4)
Advertisement
Table of Contents
