Table of Contents
Advertisement
Starting Up the Video Portal
Video Portal Start-up
To start the Video Portal, simply connect the
power cable, and set the power switch button
(both at the rear) to position I.
Power switch
On the front panel of the system the power
indicator LED, marked PWR, will turn GREEN.
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D 14074.03
10.2007
You may access the Video
Portal by entering the IP-
address of the Video Portal
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter admin as user
name. The default password
for the Video Portal is
TANDBERG. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the Video Portal.
!
Reboot the Video Portal.
"
Connect to the Video Portal via the serial interface once it has
restarted.
#
Login with User Name pwrec.
No password is required.
Safety/
To Get You
Using the
Using the
Environmental
Up and Going
Video Portal
Video Portal
Accessing the Video Portal
Forgot the Password?
$
You will be prompted for a new password.
The
Beyond that time, the system will have to be restarted to
change the password.
Viewing the
Configuring
Maintenance
System Status
the Video Portal
17
TANDBERG
TANDBERG
USER NAME
PASSWORD. Default
password is
case sensitive)
pwrec
account is active for one minute following a restart.
Dial Plan
Services
& Upgrade
Examples
VIDEO PORTAL
VIDEO PORTAL
USER GUIDE
USER GUIDE
admin
is
TANDBERG
(NB!
Contact
Information
Advertisement
Chapters
Table of Contents
