Table of Contents
Advertisement
Perform a quality control
In the operator room at the NX workstation, the DR Full Leg Full Spine image
is displayed in the Stitching pane.
Figure 12: Stitching pane
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical information in
the image.
The stitching parameters are displayed on the right side of the image:
Table 3: Stitching parameters
Button Parameter
Vertical correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
0.0
Horizontal correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
-0.1
Full Leg Full Spine DR Retrofit System | Basic Workflow | 47
0326A EN 20211014 1141
Advertisement
Table of Contents
