Gimbal Control - Walkera V1100 PRO Quick Start Manual

V1100 PRO
Quick Start Guide

12.0 Gimbal Control

The 3-axis gimbal can stabiliz e the camera, to enable the camera to take stable images even when the aircraftis flying at high
speed.
Y ou can control the pitch and yaw angles of the gimbal via the gimbal wheel or in the APP interface.
There are two gimbal modes: Follow Mode and Lock Mode. Please select the gimbal mode you need in the APP interface.
Tip:
Only when the main interface of the APP has received the image transmitted by the aircraft camera, the touch screen can be
used for control.
Turn the Gimbal Pitch Wheel UP or DN
Common
GPS
Manual
03:58:45 2.4G 51.98V
Connected GPS AUTO Mode
18 98%
N / A
T
2X
14
W
15
3 m
4
5
Center
GPS Ready
D H H.S V.S P R Y
15 m 17.1 m 0.0 m/s 0.0 m/s 0.0° 0.0° 0.0°
Take off
Landing
2.4G
Connected 03:58:45 AUTO Mode
GPS
18
98%
N/A
T
2X
RTH
14
W
15
3 m
4
5
Center
Power
GPS Ready
D H H.S V.S P R Y
15 m 17.1 m 0.0 m/s 0.0 m/s 0.0° 0.0° 0.0°
Attentions:
1)It is necessary to select the mode first and then ad j ust the angle. The yaw angle ( Y AW) is not ad j ustable in Follow Mode.
2)The speed of change of the Gimbal is determined by the amplitude by which the wheel is turned: the speed is 0 when it
returns to the midpoint, the larger the amplitude, the faster the change of the Gimbal system, and the opposite is slower.
20
Fig.12.0-1
In APP image interface
swipe up or down.
Down
WKRC-H15Z
Turn the Gimbal Yaw Wheel L or R
51.98V
In APP image interface
swipe right or left.
Down
Follow Mode
Gimbal orientation changes
as the nose orientation changes
Lock Mode
Gimbal orientation does not
change as the nose orientation
changes
Take off
Landing
Pitch angle (PIT)
RTH
Fig.12.0-4
Power
Y aw angle (Y AW)
Fig.12.0-5
Walkera All Rights Reserved
Fig.12.0-2
Fig.12.0-3
-110°
+ 150°
-150°
+ 60°
0°
0°