Table of Contents
Advertisement
S
Wi Fi Signal
Setting
Rotate
Send the data
THRO/AILE stick
Booting interface
8.3 Control interface instruction
Camera
Return to the
previous interface
Video
Photo and View
ELEV/RUDD stick
Model Select interface
Control interface
07
Instruction
for GA006
Charger
IN=MI Z
SN
O
08
WK-REMOTE
software
control
aia wzooc
2.11Gliz
(1) GA006 is suitable for 1 cell (3.7V) Li-ion or Li-polymer battery and can charge 2 pieces of batteries maximum
at the same time.
(2) Please plug the pin of your battery into the jack of the GA006 first and then connect to the power. Otherwise,
the LED may not become red and the voltage may be higher than 3.8V. You need to disconnect the USB
power supply and reconnect it.
(3) When USB power supply is well connected and battery is charging, the LED will become red. After your battery
is full charged, the LED will not become red.
8.1 Software Installing
The software is designed for iPhone or iPad, please download the software WK-REMOTE at APP Store.
8.2 Connecting instruction
(1) Connect the UFO power and the indicator light will flash quickly.
(2) Enter the iPhone or iPad setting interface to active the Wi-Fi. Then the WK******** could be found at the
Wi-Fi search list. If there is a "V" symbol, it means successful binding. Exit after finish.
(3) Enter software
in the iPhone or iPad and then enter Model Select interface. Touch icon 0 to enter control
interface. And then touch the icon (c of data transmission switch(data transmission switch is colorful). It means
successful binding if the UFO indicator light becomes solid. On the iPhone or iPad screen, there will be real-
time video image shown. Then you are able to control the UFO.(Note: When flying, please keep away from
other Wi-Fi signal environment in case of interference)
6
Advertisement
Table of Contents
