Walkera V1100 PRO Quick Start Manual page 11

Walkera All Rights Reserved
6.2 Charge the aircraft lithium battery
Charger can charge 2pcs aircraft batteries at the same time.
2pcs batteries maintain charge and discharge at the same time, to ensure best performance.
When charging, put it in a dry, ventilated place, keep away from the heat source and flammable and explosive.
Each time the charger starts, the default battery type is LiPo.
For details, please refer to the charger User Manual.
1) Connect the conversion wire and the balance charging wireextension wire:
Connect the balanced charging wire to the balanced charging wire extension wire and the battery power wire to the conversion
wire -- connect the black wire to the black wire, and connect the red wire to the red wire (as shown below).
2) Connect the charger:
Please connect the battery to the charger according
to the following connection method.
(Note: The battery charging conversion wire and balanced
charging wire extension wire must be connected to the
charger at the same time.)
Battery1
Battery2
6) High-voltage lithium battery (LiHV) switching:
Press the and
5 seconds until the high-voltage lithium battery indicator
lights up.
Balanced
Charging Wire
Battery Power Wire
Battery
keys at the same time for
Balance charging wire
extension wire
3) Power on:
Connect AC power supply (100 ~ 240V 50 / 60Hz), turn on the
power switch, the charger beeps, and the fan self-test turns.
4) Set current:
Press key to set the current to 10A (recommended
value).
5) Set the working mode:
Press the key to set the working mode to "Charging".
7) Start charging:
Long press the
screen of the battery level starts to flash.
V1100 PRO
Quick Start Guide
Conversion Wire
key for 2 seconds to start, display
11