Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Walkera V1100 PRO
Summary of Contents for Walkera V1100 PRO
- Page 1 QUICK START GUIDE V1.2 January 20th, 2021 www.walkera.com...
-
Page 3: Table Of Contents
Table of Contents 1.0 Safety Summary 2.0 About the UAV 3.0 About the Remote Control 4.0 Specifications 5.0 Check Battery Level 6.0 Charge 10-11 7.0 V1100Pro Software Interface Introduction 12-13 8.0 Prepare the Remote Control 9.0 Prepare the Aircraft 9.1 Deploy arms, paddles, GPS antennas 9.2 Install PTZ Camera (Gimbal) 10.0 Prepare for Flight 10.1 Activate the aircraft... -
Page 4: Safety Summary
Walkera All Rights Reserved 1.0 Safety Summary Use of the V1100 PRO may pose certain safety risks. It is not suitable for people under the age of 18. The Safety Summary contains only a portion of the flight safety knowledge, so be sure to read the entire Quick Start Guide carefully to avoid property damage or even personal injury due to improper operation. - Page 5 Disclaimer & Warnings There are safety risks associated with the use of the V1100 PRO UAV. It is not suitable for use by persons under the age of 18. Keep children away from the aircraft, and special care must be taken when operating it in scenes where children are present. Please read this document carefully before using this product.
-
Page 6: About The Uav
7kg for operation. * 1) Before using V1100 PRO, please watch the tutorial video at www.walkera.com to upgrade the relevant firmware and calibrate the relevant items and read the “Quick Start Guide” carefully to avoid property damage or even personal injury due to improper operation. -
Page 7: About The Remote Control
V1100 PRO Walkera All Rights Reserved Quick Start Guide 1) Arm lock nut 2) Head light 3) Positive blade Fig. 2.0-1 4) Anti-blade 5) GPS antenna 6) Quick release integrated camera gimbal 7) Communication antenna 8) Rear indicator light 9) Battery compartment... -
Page 8: Specifications
V1100 PRO Quick Start Guide Walkera All Rights Reserved The default control mode of the remote control is an “American Hand Mode” (left hand throttle). The left stick controls the aircraft’s flight altitude and direction, while the right stick controls the forward, backward and left/right flight direction. - Page 9 V1100 PRO Walkera All Rights Reserved Quick Start Guide PTZ Camera System with 3-Axis Gimbal Video Size 136× 98× 139mm recording 4K 30fps resolution Weight 452g Photograph 3840× 2160 resolution Input voltage Focal length Stability 6.7-134.5mm 3 axis (pitch, roll, yaw)
-
Page 10: Check Battery Level
V1100 PRO Quick Start Guide Walkera All Rights Reserved 5.0 Check Battery Level ※ Please turn on the remote controller to check the battery level. Be sure to fully charge the battery for the first time of use. Method: Press and hold the ON/OFF button on the remote control for 2~ 3 seconds to turn on the remote control. - Page 11 V1100 PRO Walkera All Rights Reserved Quick Start Guide 6.2 Charge the aircraft lithium battery Charger can charge 2pcs aircraft batteries at the same time. 2pcs batteries maintain charge and discharge at the same time, to ensure best performance. When charging, put it in a dry, ventilated place, keep away from the heat source and flammable and explosive.
-
Page 12: V1100Pro Software Interface Introduction
Quick Start Guide Walkera All Rights Reserved 7.0 V1100Pro Software Interface Introduction In this interface, you can preview the live HD video and photos taken by V1100 PRO, and dynamically set the parameters of the aircraft, remote control, gimbal and battery. 2.4G 51.98V... -
Page 13: Prepare The Remote Control
V1100 PRO Walkera All Rights Reserved Quick Start Guide 21) Flight status parameters: 22) Map thumbnail: tap the map thumbnail to quickly switch to the map interface (Before flight, please turn off the aircraft, D-Distance: horizontal distance between the aircraft and and tap “Map Thumbnail”... -
Page 14: Prepare The Aircraft
V1100 PRO Quick Start Guide Walkera All Rights Reserved 9 .0 Prepare the Aircraft 9 .1 Deploy arms, paddles, GPS antennas Unfold the arm upwards as indicated by the red arrows in turn and tighten the arm locking nut as indicated by the blue arrows in a clockwise direction. -
Page 15: Prepare For Flight
V1100 PRO Walkera All Rights Reserved Quick Start Guide 10.0 Prepare for Flight Before fly the aircraft, please cache the map (turn off the aircraft and tap the “Map Thumbnail” as connected to the Internet to cache the map). Please place the aircraft in an open outdoor area with the operator facing the tail of the aircraft. -
Page 16: Description Of Gps Signal Indications
V1100 PRO Quick Start Guide Walkera All Rights Reserved 10.4 Description of GPS signal indications The aircraft indicator light flashes slowly to indicate that the GPS signal has been received. The status bar of the APP interface shows that the number of satellites is large and the positioning accuracy is high, which indicates that the current GPS signal is strong. - Page 17 V1100 PRO Walkera All Rights Reserved Quick Start Guide Manual takeoff Operate the sticks as shown in Figure 11.0-1 to start the motor, then push the throttle stick up to allow the aircraft to take off. Fig.11.0-1 Fig.11.0-2 Left and right sticks (to start the motor)
- Page 18 V1100 PRO Quick Start Guide Walkera All Rights Reserved GPS Mode Turn the flight mode switch to the “GPS” position and push the throttle stick back to center. Then, the aircraft will enter the GPS mode. Waypoint Manual Fig.11.0-7 Attentions: 1)The first flight of the aircraft defaults to GPS Mode after each power on.
- Page 19 V1100 PRO Walkera All Rights Reserved Quick Start Guide Return To Home Press the RTH button to allow the aircraft to automatically return to home. Power Fig.11.0-9 Horiz o ntal distance between aircraft and Home point > 30m a. When the aircraft flight altitude is over 25 meters, the aircraft will maintain its current altitude, automatically fly back to the top of the Home point, and then descend vertically.
-
Page 20: Gimbal Control
V1100 PRO Quick Start Guide Walkera All Rights Reserved 12.0 Gimbal Control The 3-axis gimbal can stabiliz e the camera, to enable the camera to take stable images even when the aircraftis flying at high speed. Y ou can control the pitch and yaw angles of the gimbal via the gimbal wheel or in the APP interface. -
Page 21: Photo & Video
V1100 PRO Walkera All Rights Reserved Quick Start Guide 13.0 Photo & Video Note: The aircraft cannot be operated by the touch screen until the APP main screen displays a image transmitted from the aircraft. Photo taking and video recording need to be operated in the APP interface. -
Page 22: Remote Control Stick Mode Switch And Stick Calibration
V1100 PRO Quick Start Guide Walkera All Rights Reserved 15.2 Remote control stick mode switch and stick calibration The remote control stick mode and stick calibration have been set at the factory. Please refer to the following method for mode switching and calibration;... -
Page 23: Instructions For Safe Use Of Battery
2)It is strictly forbidden to use a battery that is not officially supplied by Walkera. If you need to replace the battery, please go to the Walkera official website for purchasing information. Walkera assumes no liability for any battery accidents or flight failures caused by using batteries other than those provided by Walkera. - Page 24 Manufacturer: Guangzhou Walkera Technology Co.,Ltd. Add: No.48 Wantai Rd, Taishi Industrial Park, Dongchong Town, Nansha Dist, Guangzhou, China.511453 Hotline: + 86 20-84915115 This manual is subject to update without prior written notice. Please refer to Walkera official website for latest version.