Prepare The Remote Control - Walkera V1100 PRO Quick Start Manual

Walkera All Rights Reserved
21) Flight status parameters:
D-Distance: horizontal distance between the aircraft and
the point of return.
H-Height: vertical distance between the aircraft and the
point of return.
H.S - Horizontal Speed: the speed of the aircraft in the
horizontal direction.
V.S - Vertical Speed: the speed of the aircraft in the vertical
direction.
P - Pitch Angle: the front and rear tilt angle of the aircraft.
R- Roll Angle: the left and right tilt angle of the aircraft.
Y - Yaw Angle: the left and right turning angle of the aircraft.

8.0 Prepare the Remote Control

Install antennas
Install the left and right antennas and adjust their position.
The aircraft must be operated so that it is within optimum communication range. Adjust the
orientation and distance between the operator and the aircraft in a timely manner to ensure
that the aircraft is always within optimum communication range.
No-fly zone display
Heading of the aircraft
Connected 03:58:45 AUTO Mode
GPS
14
15
3 m
4
5
D H H.S V.S
15 m 17.1 m 0.0 m/s 0.0 m/s
Fig.8.0-1
22) Map thumbnail: tap the map thumbnail to quickly switch to
the map interface (Before flight, please turn off the aircraft,
and tap "Map Thumbnail" to cache the map, as shown in
Figure 7.0-2).
23) Reserved function switch (spare).
24) Navigator.
25) Reserved function window (spare).
26) Throttle meter: real-time current throttle amount.
Map lock
Map switch
2.4G 51.98V
18
98%
N / A
RoutePlant
Waypoints
Center
GPS Ready
P R Y
0.0° 0.0° 0.0°
Fig.7.0-2
V1100 PRO
Route planning
Route flying
Latitude and longitude input
Input
Down
Quick Start Guide
Weak
Strong
Fig.8.0-2
13