Table of Contents
Advertisement
T210 MINI(WK-V8)Quick operation guide
The horizontal distance between the aircraft and the Home point is 20m or
Vertical landing
The default setting
of the RTL Height
is 60m (25-100m is
adjustable, please
set it according to
Vertical landing
the actual flight
environment)
To End The Flight
1) Manual landing, low battery protection automatic landing
or RTL mode landing, lock the motor after landing on the
ground.
2) Turn off the power of the aircraft first, and then turn off
the power of the WK-V8 controller.
3) Take the flight battery out of the aircraft.
Remove the battery:
After pressing and holding the textured part of the snaps on both sides of the battery, pull it toward the rear of
the aircraft to remove the battery.
Gimbal control
The three-axis stable gimbal provides a stable platform for the camera, so that the camera can also take a stable
picture while the aircraft is flying at high speed.You can control the tilt angle (PIT) of the gimbal by the somatosensory
control of the WK-V8 controller.
Attention:
Before using the WK-V8 controller for somatosensory control, double-click the somatosensory control switch (quick
short press twice) to switch the control object to the gimbal (the current somatosensory control object icon displayed
on the WK-V8 controller screen is "
Tilt backward
Tilt forward
The altiude difference from the Home point is greater than the set RTL Height
The horizontal distance between the aircraft and the Home point is 20m
The horizontal distance between the aircraft
and the Home point is 20m
Home point
" gimbal).
Press and hold the somatosensory
control switch while tilting the WK-V8
controller forward or backward.
The altiude difference from
the Home point is less than
the set RTL Height
1 Press
18
Walkera All Rights Reserved
20m
Ascend to
the set RTL
height first
2 Pull
Pitch angle
Advertisement
Table of Contents
