Siemens MOBILETT XP Digital Troubleshooting Manual page 57

Self-test of the detector
Test 4
Test 5
If the self-test fails, check the error message or check the conditions for self-test again.
Use a higher dose (mAs), or repeat the self-test. If the self-test fails again, contact the
Uptime Support Center.
•
Exit the program via "Exit".
•
Restart the MOBILETT XP Digital
Siemens AG
Medical Solutions
Offset test
Detector unit check
SPR8-230.840.30.03.02
12.05
ca. 30 sec
ca. 30 sec
Page 57 of 68
CS SD 24
57
MOBILETT XP Digital