Siemens MOBILETT XP Digital Troubleshooting Manual page 54

54
Sample error
After a command
request was sent
to the server, an
error was returned
in response.
After a command
request was sent
to the server, a
warning was
returned in
response.
The printer status
has returned an
error.
The printer status
has returned a
warning.
Other errors
MOBILETT XP Digital
Error messages of the imaging system
Return value
0x10
0x18
0x20
0x28
Values other
than those
above
SPR8-230.840.30.03.02
12.05
CXDI description/ log output
CXDI description: DICOM response error
(CCRTRANS_ERR_RESP)
The log output in this case is shown below.
-------------------------------------------------------------------
-(Not determined
CXDI description: DICOM response warning
(CCRTRANS_WRN_RESP)
The transfer process was successful, but a warn-
ing was returned from the server.
The log output in this case is shown below.
-------------------------------------------------------------------
-(Not determined)
CXDI description: DICOM printer status error
(CCRTRANS_ERR_PRN_STATUS)
The log output in this case is shown below.
-------------------------------------------------------------------
-(Not determined)
CXDI description: DICOM printer status warning
(CCRTRANS_WRN_PRN_STATUS)
The transfer process was successful, but a warn-
ing was returned as the printer status.
The log output in this case is shown below.
-------------------------------------------------------------------
-(Not determined)
CXDI description: DICOM communication
error(CCRTRANS_ERR_DICOM_TRANSE)
The log output in this case depends on the specific
error. A typical example is shown below.
-------------------------------------------------------------------
-18-140933[d2]ERR : c0082 SRV Send (DATA
SET) failed in SRV_SendDataSet
18-140933[d2]ERR : 190082 SRV Request failed
in SRV_NCreateRequest
18-140933[d2]ERR : 70012 NULL_key passed to
routineDUL_ReleaseAssociation
Page 54 of 68
CS SD 24
Siemens AG
Medical Solutions