Siemens MOBILETT XP Digital Troubleshooting Manual page 34

34
Code
-601
-5100
-5001
MOBILETT XP Digital
Error messages of the imaging system
Reply Message
keys
OK #1:Error
#2:Resend error
#3:File may have been automatically deleted.
[Cause]
The image cannot be resent because it was deleted for some
reason during retrieval.
[Operation after the reply key is pressed]
The image being displayed on the re-print screen is made
invalid and the image can no longer be resent.
OK #1:Error
#2:Sensor unit:Detect error
#3:Check the sensor power unit or cable connection. To recover
the system, shut it down.
[Cause]
The power of the imaging unit is OFF, or the cable is discon-
nected or damaged.
[Operation after the reply key is pressed]
The system only requires confirmation. Press OK. Only the
problematic sensor is disabled.
OK #1:Error
#2:Sensor unit:Detect error
#3:Check the sensor unit cable connection. To recover the sys-
tem, shut it down.
[Cause]
The cable is not connected although it is set for the sensor.
[Operation after the reply key is pressed]
The system only requires confirmation. Press OK. Only the
problematic sensor is disabled.
SPR8-230.840.30.03.02
12.05
Page 34 of 68
CS SD 24
Siemens AG
Medical Solutions