Table of Contents
Advertisement
1
Introduction
1.1
General
This user manual serves for ensuring proper handling and optimal functioning of the device. It shall
be read before commissioning and it shall be provided to all staff involved in transport, installation,
operation, maintenance and repair.
The user manual may not be used for the purposes of competition without the written consent of E+E
Elektronik
and may not be forwarded to third parties. Copies may be made for internal purposes. All
®
information, technical data and diagrams included in the manual are based on the information available
at the time of writing.
Intended Use
The EE895 miniature sensor module measures the CO
absolute barometric pressure (p). It is intended to be used as sensor module in devices for diverse uses
in non-condensing environments. Applications can be , e.g., in building automation, demand controlled
ventilation and process control.
The sensor module can be mounted using several mounting methods. Please observe chapter 3 for
mounting recommendations and descriptions. The use of the EE895 other than described in this manual
is not recommended.
The manufacturer cannot be held responsible for damages as a result of incorrect handling, installation
and maintenance of the device. Unauthorized modifications of the product lead to loss of all warranty
claims. The device may only be powered with safety extra-low voltage (SELV).
Disclaimer
The manufacturer or his authorized agent can only be held liable in case of willful or gross
negligence. In any case, the scope of liability is limited to the corresponding amount of the order issued
to the manufacturer. The manufacturer assumes no liability for damages incurred due to failure to
comply with the applicable regulations, operating instructions or the operating conditions. Consequential
damages are excluded from the liability.
1.2
Explanation of Symbols
This symbol indicates safety information.
It is essential that all safety information is strictly observed. Failure to comply with this information can
lead to personal injuries or damage to property. E+E Elektronik® assumes no liability if this happens.
This symbol indicates instructions.
The instructions shall be observed in order to reach optimal performance of the device.
This symbol indicates ESD (electrostatic discharge) specific notes.
Non-observance can result in damage to the device.
1.2.1
General Safety Instructions
• Use the EE895 only as intended and observe all technical specs.
• This device is not appropriate for safety, emergency stop or other critical applications where device
malfunction or failure could cause injury to human beings.
1.3
Environmental Aspects
Products from E+E Elektronik
with respect to environment protection. Please observe local regulations for the device disposal.
The individual components of the device shall be disposed of according to local recycling
regulations. The electronics shall be disposed of correctly as electronics waste.
4
are developed and manufactured observing of all relevant requirements
®
concentration, the temperature (T) and the
2
User Manual EE895 Miniature Sensor Module for CO
, T and p
2
Advertisement
Table of Contents
