Hendi 274156 User Manual page 7

Replacement of silica gel ring & air-proof ring
• When the silica gel ring[4] or air-proof ring[5]
was broken. Please follow below procedures
to replace. They shall be replaced every sixth
A A
C C
1) Screw out chocolate pool[14] from the base
unit[6].
2) Take out and discard the used silica gel
ring [4] and air-proof ring[5] from the motor
axle[12](see Picture A).
3) Take out the new air-proof ring[5] and add
lubrication oil(high temperature resistance)
into the concave area(see Picture B).
4) Insert the new air-proof ring[5](lubrication
oil face down) back to the motor axle[12]
(Make sure it is fully inserted)(see Picture C).
months if the product is operating for 12h per
day.
D D
5) Clean the remaining lubrication oil with a
damp cloth and detergent.
6) Insert the new silica gel ring[4] back to the
motor axle[12] and fix it firmly(see Picture
D).
7) Screw in chocolate pool[14] back to the base
unit[6]
NOTE: DON'T SCRATCH THE MOTOR AXLE[11]
WHEN TAKE OUT THE AIR-PROOF RING.
B B
EN
7