Table of Contents
Advertisement
REPLACING INTERIOR LIGHT BULB
WARNING!
•
Ensure the oven is unplugged from the power source before
replacing the light bulb.
•
Do not attempt to replace the light bulb while the oven is
hot as the light assembly will be hot and may cause severe
burns.
Note: While replacing the light bulb, it is important you wear la-
tex gloves and do not touch the bulbs with your bare hands. The
oils deposited on the bulb will cause the bulb to degrade faster.
Follow these steps to replace your Interior Oven Light:
1. Remove the screw holding the Light Assembly in the
oven body. (Pic 1)
2. Remove the Light Assembly from the Oven body.
(Pic 2)
3. Gently remove the Light Lens from the Light Assem-
bly. A small metal clip will come away from the light
body when the lens is removed, remove this clip with
the lens. (Pic 3)
4. Locate and loosen the two screws holding the light
bulb into the Light Assembly. (Pic 4)
5. Gently remove the old light bulb from the Light As-
sembly. (Pic 5)
6. Slide the new light bulb into the Light Assembly and
tighten the screws holding it into the Light Assembly.
(Pic 6)
7. Reinstall the small metal clip and light lens onto the
Light Assembly.
8. Reinstall the Light Assembly into the Oven body,
making sure the assembly is secured tightly.
Pic 4
Pic 5
Pic 1
Pic 2
Pic 6
Delta Heat Service (562) 263-3600 | 17
Pic 3
Advertisement
Table of Contents
