Table of Contents
Advertisement
Overview Installation Troubleshooting Contact
Starting the VT2400/VT2500 Voice Gateway Setup Program
On a computer wired to the VT2400/VT2500, open a Web browser.
Caution:
Run the voice gateway configuration setup program only from a PC attached to the voice
gateway with an Ethernet cable. Do not use a wireless device to configure the network.
1
On a computer wired to the VT2400/VT2500, open a Web browser, such as Internet Explorer or Netscape.
2
In the Address or Location field, type http://192.168.102.1 or
the Log In window:
3
In the User ID field, type the user name. The default is admin (this field is case sensitive).
4
In the Password field, type the password. The default is motorola (this field is case sensitive).
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
Advanced
FAQ Specifications Glossary License
TCP/IP
Wireless
http://192.168.0.1
and press
to display
ENTER
20
Advertisement
Table of Contents
