Configuring A Mac Access Control List On The Vt2500 - Motorola VT2500 User Manual

Overview Installation Troubleshooting Contact

Configuring a MAC Access Control List on the VT2500

You can restrict wireless access to one to 32 wireless clients, based on the client MAC address.
To configure a MAC access control list:
1
On the VT2500 Setup Program menu, click Wireless.
2
Click the SECURITY tab.
3
Click advanced to display the
4
To restrict wireless access to systems in the MAC access control list, select Allow Only Listed Stations
Access and click Apply.
5
To add a wireless client, type its MAC address in the format xx:xx:xx:xx:xx:xx in the New Station field and
click Add Station.
You can add up to 32 wireless clients to the MAC access control list.
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
Wireless > SECURITY — advanced
FAQ Specifications Glossary License
Advanced TCP/IP Wireless
page:
103