Checking The Network Connections - Motorola VT2500 User Manual

Voice gateway
Hide thumbs Also See for VT2500:
Table of Contents

Advertisement

Overview Installation Troubleshooting Contact
After you fill in the worksheet, perform the steps that follow the worksheet.
Modem Worksheet
Cable Modem (cable company)
Service Name
_______________________________
Your User Name _______________________________
Your Password
_______________________________
DHCP
Is the IP address obtained dynamically? PPPoE
Yes
No need to fill in the rest of this section
of the work sheet. Proceed to DNS
Server IP Addresses.
No
What are the values for the Static IP
Address, Subnet Mask, and Default
Gateway:
Static IP
Address
_______________________________
Subnet Mask
_______________________________
WAN Default
Gateway
_______________________________
What are the DNS server IP addresses? (Sometimes DHCP does not assign them
dynamically, so be sure to ask your cable provider, even if you answered Yes to
DHCP above.) PPPoE requires DNS Server IP Addresses as well.
DNS Server IP
1) _____________________________
Addresses:
2) _____________________________
(up to 3)
3) _____________________________

Checking the Network Connections

1
Turn on the DSL or cable modem, following the instructions provided with the modem. Wait about two
minutes for it to start up.
2
Plug the AC power adapter to the POWER connector on the
electrical outlet. This turns on the
in use.
Wait about two minutes for the
described in
"Front Panel"
3
After the Power light on the
does not work as it did before you installed the VT2400/VT2500, refer to
4
Before you can verify that the phone is working, you need to complete several basic configuration
procedures. Proceed to
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
VT2400/VT2500
VT2400/VT2500
to start up. The Power light performs a series of blinks, as
on page 5.
VT2400/VT2500
is solid green, turn on your computer. If the Internet connection
"Basic Configuration"
on page 19.
FAQ Specifications Glossary License
Advanced
TCP/IP
DSL Modem (phone company)
________________________
________________________
________________________
N/A
N/A
N/A
N/A
N/A
1) _____________________________
2) _____________________________
3) _____________________________
VT2400/VT2500
Voice Gateway. You do not need to unplug it when it is not
"Troubleshooting"
Wireless
and the other end to an
on page 116.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt2400Vt2000

Table of Contents