Wireless > Status Page Fields - Motorola VT2500 User Manual

Overview Installation Troubleshooting Contact
Wireless > STATUS
You can use this read-only page to:
•
View the wireless interface status
•
Help perform Troubleshooting
Wireless > STATUS Page Fields
Regulatory Domain
ESSID
Channel
RTS Threshold
Frag Threshold
MAC Address
Security Mode
MAC Access Control
VT2400/VT2500 Series Voice Gateway User Guide
Configuration: Basic
for wireless network problems
Indicates the country for which the
country's standards for operation of wireless
USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
equipment version marketed in the United States is restricted to usage of channels 1 through 11
only.
Displays the ESSID set on the
"Configuring the Wireless Network Name on the
who is not authorized to use your WLAN.
Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the Wireless > NETWORK
Displays the Request to Send Threshold set on the
Displays the Fragmentation Threshold set on the
Displays the VT2500 MAC address.
Displays the enabled wireless encryption type. For more information, see
the VT2500" or "Configuring WEP on the
Displays the MAC Access Control setting (see
VT2500"):
• Allow Listed — Only clients in the MAC access control list can access the WLAN.
• Allow Any Station Access — Any wireless client can access the WLAN.
FAQ Specifications Glossary License
Advanced TCP/IP
VT2500 is manufactured. The list of channels depends on the
devices. Depending on the domain set at the factory,
Wireless > NETWORK page. For more information, see
VT2500". Never provide the ESSID to anyone
page.
Wireless > NETWORK
Wireless > NETWORK
VT2500".
"Configuring a MAC Access Control List on the
Wireless
The
page.
page.
"Configuring WPA on
107