During Use (Normal Operation) - Fuji Electric NRF51 User Manual

During use (Normal operation)

6.2
LCD display change flows by operation of button are as follows:
*If either of the operation buttons was pressed when LCD backlight is turned off, LCD backlight would be
turned on. Then, LCD display will be changed as the following table shows.
No.
1 [Basic display]
 To No.2
[Information display]
 To No.3
[Configuration/Accessory display]
 To No.4
[Operating time display]
 To No.8
Display
Short press of "◎"
Short press of "◎"
Short press of "◎"
Short pressing of "◎"
Remarks
Power turns off by long
press of "◎" button. (In
Basic display or
Information display)
Indication is changed by
short press of "△" or "▽"
button in each display.
See the following pages
for detailed flow.
TN5A4215b 35/58