During Use (Normal Operation) - Fuji Electric NRF50 User Manual

6.2

During use (Normal operation)

LCD display change flow by operation of button
*If either of the operation buttons was pressed when LCD backlight is turned off, LCD backlight would be
turned on. Then, LCD display will be changed as the following table shows.
No.
1 [Basic display]
 To No.2
[Information display]
 To No.3
[Configuration/Accessory display]
 To No.4
[Operating time display]
 To No.8
Display
Short press of "◎"
Short press of "◎"
08/20/2014
10:35
d .
00
mrem
CONFIG
Short press of "◎"
Short pressing of "◎"
Hp10
Remarks
Power turns off by long
press of "◎" button. (In
Basic display or
Information display)
Indication is changed by
short press of "△" or "▽"
button in each display.
See the following pages
for detailed flow.
TN5A2293a 21/42