Table of Contents
Advertisement
Call button action
5.
Alarm type
Initial setting of alarm operation
Emergency alarm
(1) Operation timing
[Pattern No.5]
(2) Buzzer frequency
[High]
(6) Mute
[Not available]
(10) LCD indication sample
*Operation by pressing call button is selectable from the following four settings by user with Dosimeter
Configuration Tool.
[Emergency alarm] ... When call button is pressed, the above alarm operation generates and
emergency data is delivered to upper management system if radio telemetry setting is "ON".
[Support assist] ... When call button is pressed, the above alarm operation generates (the same as
"Emergency alarm"). Emergency data is not delivered to upper management system if radio telemetry
setting is "ON".
[Test] ... When call button is pressed, test sequence for display, LED, vibrator and buzzer is performed
in the same way as startup
[OFF] ... When call button is pressed, nothing happens.
(3) Buzzer sound
[ON]
(7) Vibrator
[ON]
Emergency alarm
(4) Backlight
(5) Sounding time
[RED]
[Continuous]
(8) Flash LED
(9) Latch
[ON]
N/A
TN5A4215b
22/58
Advertisement
Table of Contents
