Fuji Electric NRF51 User Manual page 12

4.3.2 Audible alarms
Alarm activation and beep pattern are configurable by user with Dosimeter Configuration Tool.
The items that can be set are as follows:
(1) Operation timing of LED, Vibrator and Buzzer
Operating timing setting is selectable from the following 6 patterns for each alarm type, but pattern No.6
can be selected by "Low battery voltage" only.
[Pattern No.1] ... When alarm is generated, the operating timing is showed below.
[Pattern No.2] ... When alarm is generated, the operating timing is showed below.
[Pattern No.3] ... When alarm is generated, the operating timing is showed below.
[Pattern No.4] ... When alarm is generated, the operating timing is showed below.
TN5A4215b 12/58