Printing Test Images From The Hard Disk - AGFA Drystar 5500 Reference Manual

Drystar 5500, Drystar 5503 | Advanced Operation (key-operator mode) | 49

Printing test images from the hard disk

Test images are useful for checking the print quality. The printer offers a
number of built-in test images stored on the hard disk.
1. On the 'Print image' menu, press the Confirm key to select 'Test image'.
The 'Select test image' screen is displayed:
2. Press the Up/Down arrow keys to select the desired test image, followed
by the Confirm key.
3. Define the input tray for printing.
The 'Select input tray' screen is displayed:
4. Press the Up/Down arrow keys to select the desired input tray, followed by
the Confirm key.
The 'Number of copies' screen is displayed:
5. Press the arrow keys to increment/decrement the number. Press the Left/
Right arrow keys to move through the field.
6. Press the Confirm key to confirm the number of copies.
The 'Queuing file' screen will be shown to indicate to the operator that the
printing action from floppy is accepted and in process:
After about five seconds this screen will disappear.
Related Links
Data entry on page 11
2900J EN 20180320 1448