Printing Test Images - AGFA Crystal Imager Reference Manual

Printing test images

Test images are useful for checking the print quality. The printer offers a
number of built-in test images stored on the internal media.
1. On the Print image menu, press the Confirm key to select 'Test image'.
The 'Select test image' screen is displayed:
2. Press the up/down arrow keys to select the desired test image, followed by
the Confirm key.
The 'Number of copies' screen is displayed:
3. Press the arrow keys to increment/decrement the number. followed by the
Confirm key to confirm the number of copies.
4. Define the tray for printing.
The 'Select tray' screen appears:
5. Press the Up/Down arrow keys to select the desired tray, followed by the
Confirm key.
The 'Queuing file' screen will be shown to indicate to the operator that the
printing action is accepted and in process:
<filename>
After about five seconds this screen will disappear.
Wait until one or more print jobs have finished before launching a new
one.
Related Links
Data entry on page 12
Accessing the print images menu
Crystal Imager | Advanced Operation (key-operator mode) | 47
Note:
If you try to print another image, the following message will
appear:
on page 46
3830B EN 20210520 0952