Drystar 5500, Drystar 5503 | Controlling the printer via a remote PC (with browser) | 95
Starting the remote session
To start the remote session, enter the IP address of the printer in the
Address bar of the browser.
There are five access levels: operator, Key-operator, service engineer,
specialist and security administrator. Each level, except the operator level,
has its own user name and password.
Note: When starting the remote session, make sure the printer is
in 'Ready' mode.
Note:
A remote session disables the local keypad and display.
While you work remotely, the following screen is displayed:
2900J EN 20180320 1448