Changing The Input Tray Settings (Upper / Lower) - AGFA Drystar 5500 Reference Manual

Drystar 5500, Drystar 5503 | Advanced Operation (key-operator mode) | 29

Changing the input tray settings (upper / lower)

Changing the film view
1. In the 'Upper input tray' screen, press the Down key twice, followed by the
Confirm key to select 'Film view'.
The 'Film view' screen is displayed:
The current film view is indicated with an *.
2. Press the Up/Down arrow keys to select the desired film view.
3. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Note: In the procedure, we will assume that the film view for the
upper input tray is to be changed. The procedure for the lower
input tray is identical.
on page 23
2900J EN 20180320 1448