AGFA Drystar 5500 Reference Manual page 71

Drystar 5500, Drystar 5503 | Advanced Operation (key-operator mode) | 71
The printer will copy the new software data onto the hard disk.
16. Repeat steps 14 and 15 until all floppy disks have been copied onto the
hard disk.
When all the files have been copied from the last floppy disk, the following
screen is displayed:
17. Remove the last floppy disk and press the Confirm key.
In case the software requires a reset, the following screen will be
displayed:
18. Press the Confirm key to reset the printer.
In case the software requires no reset, the following screen will be
displayed:
19. Press the Confirm key to continue. You will return to the 'Installation'
screen.
2900J EN 20180320 1448