Checking The Thermostat; Installing The Thermostat - Beta RR 125 LC Manual

EAS26450

CHECKING THE THERMOSTAT

1. Check:
• Thermostat
Does not open at 80.5–83.5 °C (176.9–182.3
°F) → Replace.
M MMM M MMM M M MMM M
a. Suspend the thermostat "1" in a container "2"
filled with water.
b. Slowly heat the water "3".
c. Place a thermometer "4" in the water.
d. While stirring the water, observe the thermo-
stat and thermometer's indicated tempera-
ture.
82 ± 1.5 ˚C
( 179.6 ± 2.7 ˚F )
A. Fully closed
B. Fully open
TIP
If the accuracy of the thermostat is in doubt, re-
place it. A faulty thermostat could cause serious
overheating or overcooling.
L LLL L LLL L L LLL L
M MMM M M MMM M M MMM M
4
3
1
2
95 ˚C
(203 ˚F )
L LLL L L LLL L L LLL L
2. Check:
• Thermostat cover
Cracks/damage → Replace.
3. Check:
• Radiator inlet hose
Cracks/damage → Replace.
EAS26480

INSTALLING THE THERMOSTAT

1. Install:
• Thermostat
TIP
Install the thermostat with its breather hole "a"
facing up.
MMM
2. Install:
• Copper washer
• Coolant temperature sensor
ECA22B1012
NOTICE
Use extreme care when handling the coolant
temperature sensor. Replace any part that
was dropped or subjected to a strong im-
pact.
3. Fill:
4. Cooling system
(with the specified amount of the recom-
mended coolant)
4. Check:
• Cooling system
Leaks → Repair or replace all faulty parts.
5. Measure:
6. Radiator cap opening pressure
Below the specified pressure → Replace the
radiator cap.
LLL
THERMOSTAT
New
Coolant temperature sensor
18 Nm (1.8 m·kgf, 13 ft·lbf)